Let’s Fix Linksys Velop Red Light Issue!
Linksys WiFi mesh systems are gaining popularity because of their top-notch performance. Users are extremely happy and satisfied with Linksys Velop WiFi. But then just like every other technical device, there are situations when the Linksys mesh system is prone to certain issues. Fixing these issues instantly is important as everyone wants to be online to get one’s everyday tasks done. In this post, we are going to discuss one such issue that is quite common with the Linksys Velop and that is Linksys Velop red light issue. So if you are looking for information on how to get the red light issue fixed, then keep reading further.
Linksys Velop Red Light Meaning
The LED light on the Linksys Velop shows the current status of the device. Seeing a solid red light on the Velop represents no internet connection. A blinking red light on it tells that the Velop is out of the range of the modem or it has trouble communicating with the modem. Let us now see how you can fix this issue.
Linksys Velop Red Light Issue: Fixed
Find in this post the tried and tested hacks that worked well in fixing the Linksys Velop red light issue with many users.
Fix 1: Reboot the Linksys Velop
Commence the Linksys Velop red light troubleshooting process by rebooting the Linksys Velop. Simply power it off by toggling the power button to the off position and unplugging it from the wall socket. After waiting for a couple of seconds plug the Velop into the power socket again and toggle the power button to the On position. The red light should no more be troubling in case technical glitches were the reason causing this trouble. On the off chance, you are seeing the red light on your Velop, try another hack given here.
Fix 2: Check WAN Port Detection
At times, after the firmware updates are done to the Linksys Velop, the automatic WAN port detection is disabled. And if you have connected the modem to another port where it was not connected earlier, you will face the Linksys Velop red light issue. This is because the automatic WAN port feature is disabled and now you have connected the modem to the LAN port. All you need to do here is connect the cable to the port where it was connected earlier.
Fix 3: Reduce Distance
As mentioned earlier, Linksys Velop red light represents poor or no internet connection to the Velop node. You can fix this by bringing the Velop closer to the host modem. This will help you bring the Velop within the modem’s network range. While doing so, it is recommended that you do not place them right next to each other as their signals will clash this way.
Fix 4: Verify Cables
In this fix, you need to check the Ethernet cable first. If the Linksys Velop and the modem are connected using an Ethernet cable, then check if this cable is damaged or has deep cuts on it. It is highly recommended you replace the cable with a good-condition cable right away. Apart from this, it is to be ensured that you are making a strong and firm connection between the devices by connecting the Ethernet cable tightly to the respective ports on both devices. Simply put, the Velop should be receiving a proper internet connection.
After you are done verifying the Ethernet cable, check the power cable or the power adapter. Make sure that it is plugged properly into an active and non-damaged power socket in your home. The whole purpose of this is to ensure a stable and non-fluctuating power supply to the Linksys Velop.
Fix 5: Reconfigure Linksys Velop
Now there can be another reason due to which you are facing Linksys Velop red light issue. It is an improper or impartial Linksys Velop setup process followed. You won’t be able to access the Velop internet if you haven’t set it up properly. Thus we suggest you first reconfigure the Linksys Velop. For that, you first need to reset it and delete the customized settings. This will restore the factory default settings on the Velop. After you have reset your Linksys Velop, reconfigure it using the correct setup steps.
Using the user manual is recommended to get the correct setup procedure. We are sure that after you have reconfigured your Linksys Velop, Linksys red light issue will no longer be troubling you.
Need Further Assistance?
This is all about how to fix Linksys Velop red light issue. We suggest you keep the firmware of the Linksys Velop updated to the latest version all the time. For this, you just need to access the Linksys extender login page and get the process done. If you are looking for information on how to update the firmware or how to correctly set up Linksys Velop, then getting in touch with our technical team is recommended.