Linksys Blinking Blue Light Not Happening? Let’s Fix This!

Linksys WiFi home mesh systems are built with different LEDs on them. Every LED has a meaning. They are not there for decoration. The lights signify the current status of the device. In case the LEDs are not behaving as they are supposed to, this indicates an issue with the device. Thus, you can directly get to know about the issue and head toward troubleshooting it. For instance, while you are powering up your Linksys WiFi mesh system, the LED on the nodes should blink blue. Linksys blinking blue light indicates the device is in power-on mode. Once the device is powered on, you can begin enjoying its seamless internet. But what if the Linksys node LED does not blink blue? Yes! You read it right. Users have reported this issue with their Linksys devices. In this guide, you will find troubleshooting tactics that work well in fixing Linksys blinking blue light not happening issue.

Understanding Linksys Nodes Lights

Before you begin mending the issue with your Linksys nodes, it is crucial to know about the different lights on the device and their meaning. Trust us; this is going to be helpful to you. Knowing this will help you know any issue beforehand in case the lights begin behaving unusually. Here is the list of different lights and what it implies:

Solid Blue – A solid blue LED shows the device is connected to the internet. This means the node is online and is in good condition and ready to be used.

Solid Purple – If the node light is solid purple; this implies the node is ready for setup. Simply get to the Linksys app and carry on with the Linksys mesh system setup process.

Blinking Blue – If your node is blinking blue this means that the device is powering up. You need to wait till it is powered up completely to begin accessing its network.

Blinking Purple- A blinking purple LED indicates the setup process is in progress. Simply keep following the instructions and get through the setup process smoothly.

Blinking Red- This implies the node is out of range. Consider bringing it closer to another node. If it is the primary node then bring it closer to the host modem.

Yellow or Orange- This happens when the node is receiving a weak or intermittent connection. Thus bring the node closer to another node to improve the signal.

Now that you have gained enough knowledge about different LED colors and their meaning, you can know if something is wrong with your device. For your information, you can always get support from our technical support staff to get the issue fixed.

Linksys Blinking Blue Light Not Happening Issue [Fixed]

Let us now get back to troubleshooting Linksys blinking blue light not happening issue. As mentioned earlier, a blinking blue light on the Linksys node means it is powering up. In case the light does not blink blue, you need to get to troubleshooting. Here is what you can do in such a situation:

1. Check Power Socket

Begin by taking a good look at the power socket that the node is connected to. Do you find any damage on it? Yes? Then consider plugging your Linksys node into a different power socket. As soon as you plug it into another wall socket, the Linksys node should begin blinking blue. In case this does not happen, move to the next step.

2. Verify Power Adapter

Looks like the power adapter of the Linksys node has some issue with it, which is causing the Linksys blinking blue light not happening issue. Thus, check if it is damaged. Or perhaps it is not connected correctly to the node or the power socket. What you can do now is replace the power adapter with a new one in case it is damaged. Also, make sure it is inserted securely in the power socket as well as the Linksys node. In case this does not bring you any luck then there is another step that can be performed to fix the issue.

3. Ensure Non-Fluctuating Power Supply

Make sure your Linksys node is receiving a non-fluctuating power supply. Linksys blinking blue light not happening can also be if the power supply is intermittent. In case there is a power outage in your area, then take the help of the UPS to ensure a stable power supply to the node.

On Final Note

As mentioned above, the Linksys blinking blue light issue can occur if there is an issue with the power supply to the Linksys node. In such a situation, the above-mentioned troubleshooting hacks will be helpful. In case even after following these hacks, the issue seems adamant to leave, then get in touch with our technical team to help you out.