Basic Hacks to Solve Linksys RE6500 Blinking Orange Light Issue
Why is Linksys RE6500 blinking orange light despite doing a successful a setup? Is there anything which can be implemented to turn the status from orange to green?
Both these questions have been thoroughly answered in this blog post. Taking this into consideration, continue reading. Before you can even comprehend what is happening, you will be able to resolve the issue at hand.
What Caused Linksys RE6500 Extender to Blink Orange?
Well, there is not one reason that caused the orange light issue with your Linksys RE6500 extender. There are plenty, some of which have been discussed here:
- The firmware of your wireless range extender has either gotten corrupted because of a mistake from your end or is running on its outdated version.
- You have placed the extender in one room whereas the router is kept in the other due to which their signals are not able to get transmitted.
- Another reason why you are experiencing the orange light issue is because you have used a worn out Ethernet cable to connect the networking devices.
Now that you have become aware of the topmost reasons behind the issue at hand, the time has come for you to resolve it by going through the troubleshooting hacks given below.
[Solved] Linksys RE6500 Blinking Orange Light Issue
For your information, if there comes a point when you get tired of reading, it is suggested that you contact our team of professionals. Without taking much of your time, they will help you stop the LED of your networking device from flashing orange.
1. Check the Ethernet Cable Used
First of all, check the Ethernet cable that is currently connecting the Linksys RE6500 wireless range extender to the host router. In case the situation is the same as outlined under the list of reasons behind the Linksys RE6500 blinking orange light issue, then you should replace the Ethernet cable.
Once you get a new Ethernet cable home, connect one of its end to the extender and another to the router. Ensure that the connection is finger-tight. Apart from this, see to it that the ports located on the devices are not damaged. Doing so will make sure that signal transmission is happening smoothly throughout your house.
2. Relocate the Linksys Extender
In view of you reading this hack means that you are still stuck with the Linksys RE6500 blinking orange light issue. Well, it is possible because while doing Linksys RE6500 setup, you placed your extender at the wrong location. So, consider changing its location. Ensure that this time you keep it in the same room where the host router is kept.
Along with this, take care of one fact, i.e. Bluetooth speakers, cordless phones, mirrors, fish tanks, treadmills, televisions, washing machines, baby monitors, microwave ovens, refrigerators, aluminum studs, etc are kept away from the Linksys RE6500 blinking wireless range extender to avoid signal interference.
3. Update the Extender Firmware
In case not even one single hack given above helped you to resolve the Linksys RE6500 blinking orange light, then you should not waste any more time to update the firmware of your networking device to its most recent version. For your knowledge, there is only method through which the process can be executed.
To know about how to execute the firmware update process via extender.linksys.com or it is recommended that you refer to the instructions given in the user manual. In case, doing so seems like a lot of hard work for you, then reach out to our team of professionals. They will surely be able to guide you in a limited frame of time.
To Conclude
There is nothing that will be able to stop you from resolving the Linksys RE6500 blinking orange light issue if you go through the troubleshooting hacks given above carefully.
Assuming you have successfully fixed the issue that you were facing, feel free to take full advantage of your networking device. To learn about the several features of your extender, consider referring to its user manual.
